Choosing Wood and Plywood for Home Furniture
The board your carpenter uses decides how long your furniture lasts, especially in humid places like Siliguri where swelling and termites are common. This guide explains the common materials in plain language.
By the KaajVa team 4 min read
Plywood grades
Plywood is made from thin layers of wood glued together. The glue and treatment decide the grade.
- MR (moisture resistant): good for dry areas such as bedroom wardrobes and living room furniture.
- BWR (boiling water resistant): better moisture resistance; a good all-round choice.
- BWP (boiling water proof) or marine ply: best for kitchen sink units, bathroom vanities and anywhere wet.
Engineered boards
Engineered boards are cheaper and smoother, but differ in strength and moisture resistance.
- HDHMR (high density, high moisture resistance): dense and moisture resistant; popular for shutters and kitchens.
- MDF (medium density fibreboard): very smooth, good for painted or routed designs, but weak against water.
- Particle board: the cheapest; used in ready-made furniture; swells if it gets wet.
Solid wood
Solid woods such as teak, sal and sheesham are strong and can be repaired and polished for decades, but they are expensive and can move with humidity if not seasoned properly. Many homes use solid wood for frames and doors and plywood for carcasses.
What to use where
A practical combination for most homes:
- Kitchen base units, especially under the sink: BWP plywood.
- Kitchen shutters: BWP plywood or HDHMR with laminate or acrylic.
- Wardrobes and beds: MR or BWR plywood.
- Study tables and shelves: BWR plywood or HDHMR.
- Doors and frames: seasoned solid wood or flush doors.
Humidity and termites
In humid regions, choose termite-treated and moisture-resistant boards, seal all edges with edge banding, and keep furniture a little away from damp walls. If your home has had termites before, ask a pest control service for an anti-termite treatment before installing new woodwork.
Laminate, veneer, acrylic and PU finishes
The finish is the surface you see and touch. It affects price, durability and how easy the furniture is to clean.
- Laminate: durable, affordable and available in many colours and textures; the most popular choice for wardrobes and kitchens.
- Veneer: a thin layer of real wood; looks rich and can be polished, but needs more care.
- Acrylic: glossy and modern, easy to wipe, but shows scratches and fingerprints.
- PU or duco paint: smooth painted finish in any colour; premium look, higher cost.
- Membrane or PVC: moulded shutter designs; avoid near heat sources such as the hob.
Spotting fake or low-grade plywood
Plywood is sold under many brand names, and low-grade boards are sometimes stamped with a higher grade. A few simple checks help.
- Check for the brand name, grade and IS mark printed on each sheet, not only on the invoice.
- Look at the edge: layers should be even, tightly bonded and without large gaps.
- Heavier sheets of the same thickness usually mean denser, better core layers.
- Buy from authorised dealers and keep the invoice.
Budget planning
A useful way to control cost is to spend on what gets wet and what you touch most, and save elsewhere. Use BWP ply and good hardware in the kitchen, where failure is expensive, and MR ply with laminate in dry bedroom wardrobes. Loft units and rarely opened storage can use more economical boards.
Ask your carpenter for two quotes, one with premium materials throughout and one with this mixed approach, so you can see the difference and decide.
Care and maintenance
Wipe up water spills on laminates and edges quickly, especially around the sink. Keep furniture a few centimetres away from damp walls, run fans or dehumidifiers in closed rooms during the monsoon, and oil hinges and channels once a year. For solid wood, a polish every few years keeps it protected.
Questions to ask your carpenter about materials
Materials are where quotes differ most, so ask about them directly.
- Which brand and grade of plywood or board are you quoting?
- Is the board termite and borer treated?
- What laminate brand and thickness will you use on the outside and inside?
- Which edge banding will you use, and on all edges?
- Can I see the sheets when they arrive, before cutting starts?
Frequently asked questions
Which plywood is best for a kitchen?
BWP plywood for base units and anywhere near water; BWR or HDHMR is acceptable for wall units.
Is HDHMR better than plywood?
HDHMR is dense, smooth and moisture resistant, and good for shutters. Plywood holds screws better and is generally stronger for carcasses.
How can I check the plywood grade?
Look for the grade and IS mark printed on each sheet, and ask for the brand invoice.
Does laminate protect plywood from water?
It protects the surfaces, but water can enter through unsealed edges. Proper edge banding is essential.
Prices in this guide are typical ranges for guidance only. They vary by city, provider and the exact job; always ask for a quote before work starts.
More guides
Carpenter Rates for Furniture Repair, Custom Work and Kitchens
How carpenters charge for repairs, custom furniture and modular kitchens: per job, per day, per running foot and per sq ft, and what to compare in quotes.
TV Repair Cost in India: What LED and Smart TV Repairs Really Cost
Typical LED and smart TV repair costs in India by fault: power board, backlight, motherboard and panel. What drives the price and how to avoid overpaying.
Repair or Replace Your TV? A Simple Way to Decide
Should you repair your old TV or buy a new one? Use the age, fault and cost rule of thumb, and learn which repairs are almost always worth doing.
