Electrical Safety Checklist for Indian Homes
Most electrical accidents at home are preventable. Use this checklist once a year, and whenever you move into a new home, to spot problems early and know when to call an electrician.
By the KaajVa team 4 min read
Your distribution board: MCBs and RCCB
The distribution board (DB) is the heart of your home's safety. MCBs (miniature circuit breakers) switch off a circuit when it is overloaded or short-circuited. An RCCB (residual current circuit breaker) switches off when current leaks to earth, which is what happens when someone gets a shock. Every home should have both.
- Check that every circuit has a correctly rated MCB and that they are labelled.
- Press the test button on the RCCB once a month; it should trip immediately.
- Never replace an MCB with a higher rating to stop it tripping; find the cause instead.
Earthing
Earthing gives fault current a safe path into the ground. Poor earthing means metal-bodied appliances such as washing machines, geysers and fridges can give shocks. Earthing pits dry out and corrode over time, so have an electrician test earthing every few years and after any major wiring work.
Sockets, plugs and extension boards
Overloaded sockets are one of the most common causes of electrical fires.
- Do not run heaters, geysers, irons or ACs from multi-plug adapters or extension boards.
- Replace sockets that are loose, cracked, discoloured or feel warm.
- Use 16A sockets for heavy appliances and 6A sockets for light loads.
- Replace damaged cords and plugs instead of taping them.
Warning signs to act on
Call an electrician promptly if you notice any of these.
- MCBs that trip often.
- Flickering or dimming lights when appliances start.
- A burning smell, buzzing sound or scorch marks near switches or the DB.
- Mild shocks from appliances or taps.
- Wiring more than 20 to 25 years old, or old aluminium wiring.
Monsoon precautions
Heavy rain brings special risks, especially in places like Siliguri with long, wet monsoons. Seepage into walls can reach wiring and switchboards.
- Fix leaks and damp walls near switchboards and the DB quickly.
- Keep outdoor sockets and lights covered and weatherproof.
- Unplug sensitive electronics during thunderstorms or use surge protection.
- Never touch switches with wet hands or stand on a wet floor while operating appliances.
Children and older family members
Use shuttered sockets or socket covers where young children can reach them, keep cords tidy and out of walkways, and make sure everyone in the home knows where the main switch is and how to turn it off.
Appliances and heavy loads
Modern homes run far more appliances than the wiring in older buildings was designed for. ACs, geysers, induction cooktops, microwaves and washing machines draw heavy current, and running several on one old circuit can overheat the wiring even if the MCB does not trip.
- Give ACs and geysers their own circuits and correctly rated MCBs.
- Do not run an induction cooktop and a microwave from the same socket or extension board.
- Unplug geysers when not in use if the switch is outside the bathroom.
- Check appliance cords for damage every few months.
When you move into a new or rented home
Before you move in, spend ten minutes checking the basics: find the main switch and the distribution board, check that circuits are labelled, press the RCCB test button, and look for loose sockets, exposed wires or scorch marks. If the wiring looks old or you notice any warning signs, ask for an electrical safety inspection before you connect heavy appliances.
Landlords are responsible for safe wiring in most rental agreements. Report problems in writing and keep a copy.
A yearly five-minute routine
Put a reminder in your calendar once a year, ideally just before the monsoon, to go through this list.
- Test the RCCB with its test button.
- Check that every MCB is labelled and none are warm to the touch.
- Look for scorch marks, cracks or loose fittings on switches and sockets.
- Check outdoor lights and sockets for water ingress.
- Replace any extension boards that are cracked or discoloured.
What to do in an electrical emergency
Knowing what to do in the first minute can prevent serious injury. If someone is getting a shock, do not touch them with bare hands; switch off the main supply first, or push them away from the source with a dry wooden or plastic object. If there is sparking or smoke, switch off the main if you can reach it safely. Never throw water on an electrical fire; use a dry powder or CO2 extinguisher, or sand. Call 112 for emergencies and call an electrician before switching the supply back on.
Frequently asked questions
What is the difference between an MCB and an RCCB?
An MCB protects wiring from overload and short circuit. An RCCB protects people from electric shock by detecting current leaking to earth. Homes need both.
How often should I get an electrical inspection?
Every five years for most homes, and whenever you buy or rent an older property or add heavy appliances.
Why does my RCCB keep tripping?
Usually an appliance with an earth leakage, such as a faulty geyser element, or moisture in wiring. Unplug appliances one by one to find it, or call an electrician.
Is it safe to use an extension board for an AC?
No. An AC should have its own dedicated circuit, MCB and correctly rated socket or isolator.
Prices in this guide are typical ranges for guidance only. They vary by city, provider and the exact job; always ask for a quote before work starts.
More guides
How to Hire a Reliable Electrician Near You
What to check before hiring an electrician, questions to ask on the phone, typical charges for common jobs, and red flags to avoid.
TV Repair Cost in India: What LED and Smart TV Repairs Really Cost
Typical LED and smart TV repair costs in India by fault: power board, backlight, motherboard and panel. What drives the price and how to avoid overpaying.
Repair or Replace Your TV? A Simple Way to Decide
Should you repair your old TV or buy a new one? Use the age, fault and cost rule of thumb, and learn which repairs are almost always worth doing.
